JiangSu ChangNuo New Materials Co., Ltd.
JiangSu ChangNuo New Materials Co., Ltd.
Add to Cart
Installation Machinery Grinding machine For Sports Flooring
Product Description
Brush Grass Machine
| Working principle |
| Brush grass machine is designed the special equipment for the artificial lawn fills the quartz and usually maintenance. It is useful filled the quartz combing even ,smooth, fills with the foot of the grass, it can make the grass standing . |
Primary Technical specifications
| Power: | 3kw |
| Work breadth : | 1200mm |
| Moving speed : | 65m/min |
| Weight: | 250kg |
| Size: (L×W×H) | 1500×1500×930 |
Grinding machine
|
| 2.Main Technical Data: |
| a.Voltage:380HV b.Frequency:60Hz c.Power:5.5kw d.Dimensions:1000mm×600mm×850mm |
Line Marking Machine
| Technical data: |
| Monotype HDNDA : G×100 Compressor output : 98cm Bore×stroke : 56x40 mm Compression: 8.5:1 Max: Output: 2.2kw/3600rpm Max: torque: 5.7 Nm/3600rmp Fuel tank capacity: 1.2 liter Engine oil capacity: 0.4 liter Engine grease: SF or SG SAF10w-3o Fuel consumption : 327g /KWH Spark plugs NGK: CR5HSB DENSO: U16FSR-UB Airless spraying pump system: diaphragm pump Delivery flow rate at 12Mpa: 1.1L/min Maximum pressure: 22.5MPa Max: temperature of the coating material: 43℃ Reservoir capacity: 16L Weight: 80kg Measuring point: 0.6m behind the spray gun |
Paver Machine
Main Technical Parameters:
1, electrical system
(1) voltage: 380V
(2) power: 8KW
E-motor: 0.75KW×2
(3) hydraulic motor 1.1KW
(4) shaking motor 0.75KW
2, Hydraulic system
(1) Pressure: 10MPa
(2 )cylinder journey 280mm
3, Driver system
(1) moving speed of track 0.8~6m/min
(2) size of the track piece 50×25mm
4, pre-strike-off rail
(1) range of height adjust 0~80mm
5, Screed:
(1) range of height 0~50mm
(2)range of angle 0~10°
(3) range of temperature 0~120℃
6, operation data:
(1) paving width: 2500mm
(2) paving capacity: 100~400m2/h
7, weight: 850kg
8, external dimension: 2700×1600×750mm(L,W,H)
Spray Machine
| Work-theory |
| Spray machine was designed for made out of cold mixed synthetic components onto spraying outdoor or indoor playing surface. It adopts a pedestal to anticipate a pump the mixture pump of liquid plastics and solid gum grain go into air gun, in the meantime from a pedestal empty press the compressed air of the machine output's to also get into an air gun, in the air gun mixture, and spray the mixture that fog turn to in the plastic place surface. |
Technical specifications:
1.The air compressor
(1) Pressure: 1Mpa
(2) Quantity: 0.64m3/h
(3) Power: 7.5KW
2. Spray pump:
(1) Pressure: 1Mpa
(2) Quantity: 0.0125m3/min
(3) Power: 2.2KW
3. Capacity: l00L
4. Spraying output: 12-15kg/min
5. weight: 400kg
6. Size: (L×W×H) 1500×1000×1100mm
Mixer
1. Working Principle
The machine is used for agitation of mixture of adhesive and plastic and suitable for all kinds of plastic raw materials and color powder or granules.
2. Mechanical Feature
a. Agitate steady and powerful.
b.The design for this machine is novel ,the structure is compact , the control is simple , the drying is uniform , energy consumption is low, the application is very wide .
c. Very convenient to the maintenance, long working life and discharge convenient.
d. It occupies less space, large capacity, low power consumption, labor saving, convenient operation, and quick and even mixing.
3. Main Technical Data:
a. Voltage:380HV
b. Frequency:60Hz
c. Power:4kw
d. Dimensions:1100mm*1100mm*1050mm
Sand Filling Machine
1. Working Principle
The Sand Filling Machine is used by filling sand in the lawn. With its flexibility, small quantities and high quality. Few worker can manipulate it.
2. Mechanical Feature
With the sand machine four wide wheels can be braced to move. Because of small pressure can relieve damage to the lawn.
With the way of ratchet wheel indirection working, when the wheel is moved forward, the sand can be unload continuously. But it is moved backward, it can not do.
The unload quantity can be controlled by door stop.
3. Main Technical Data: